Support
-
Degradation of Bisphenol A by ozonation in a rotating packed bed: Modeling by response surface methodology and artificial neural network
旋转填料床中臭氧化降解双酚 A:通过响应面法和人工神经网络建模 Lei Wang a, Chu Qi b, Yuan Lu c, Moses Arowo d,Read more -
Novel catalytic ceramic membranes anchored with MnMe oxide and their catalytic ozonation performance towards atrazine degradation
新型氧化锰催化陶瓷膜及其臭氧氧化降解阿特拉津的性能研究Yuan He a, Liangjie Wang a b, Zhan Chen a, Xia HuangRead more -
Precautions for the Use of 3S-J5000 Ozone Online monitor
3S-J5000臭氧在线检测仪使用注意事项■先通空气或者氧气,再开检测仪,检测仪会自动校零。使用中途过程中校零,必须有气体通过(无论是空气、氧气还是臭氧)。 ■Read more -
Dimensions of the 3S-J5000 ozone monitor
3S-J5000臭氧检测仪的尺寸为355mm(长)295mm(深)175mm(高),这一设计不仅保证了设备在实际使用中的功能性和稳定性,还兼顾了操作便利性和维护Read more -
Ozone Decomposition below Room Temperature Using Mn-based Mullite YMn2O5
摘要:首次在三元氧化催化剂YMn2O5上实现了无能耗的超低温臭氧分解。在−40℃的低温条件下,YMn2O5氧化物催化臭氧分解的转化率为29%(反应速率为1534Read more -
How can the zeroing time interval of the J5000 ozone detector be modified?
J5000臭氧检测仪如何修改校零时间间隔呢?臭氧检测仪的校零时间如何修改,任何检测仪在检测时都会出现漂移,校零的目的就是将误差减到小。那么我们在检测臭氧发生器Read more -
How to set the ozone production function of the J5000 ozone detector?
臭氧检测仪臭氧产量功能如何设置?在3S-J5000臭氧检测仪中,有一个功能是臭氧产量计算,但这个功能需要设置才可以使用,如何设置呢?臭氧产量公式中包含了进气量和Read more -
How to select a UV ozone concentration detector?
紫外臭氧浓度检测仪如何选型?紫外臭氧浓度检测仪如何选型?一实验室要进行臭氧实验,需要测量臭氧发生器出口的臭氧浓度和臭氧尾气浓度,计算臭氧利用率,臭氧检测仪该如何Read more -
Precautions for connecting ozone generators and J5000 ozone detectors
臭氧发生器和J5000臭氧检测仪连接注意事项实验用臭氧发生器和臭氧检测仪连接注意事项,我们在使用的时候,可以看到只有检测仪和臭氧发生器之间的管子使用的聚四氟乙烯Read more -
Function Introduction of 3S-J5000 Ozone Online Monitor
Function Introduction of 3S-J5000 Ozone Online MonitorUltraviolet ozone detectorRead more